AC 220V 1CH 10A Relay RF Remote Control Switch wireless Light Switch Learning Function Receiver Transmitter COM NO NC

AC 220V 1CH 10A Relay RF Remote Control Switch wireless Light Switch Learning Function Receiver Transmitter COM NO NC
  • Продавецwww.prada-handbags-sale.us
  • Список ценUS $20.39piece
  • Продажная ценаUS $20.39piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,5 (484)

Oписание продукта

Specifications:
 
Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
 
1.Transmitter
 
It is a panel 86 wall transmitter that can be stuck anywhere. It is a learning code transmitter EV1527 IC Chip. It can be learned into most of the learning code receiver, it can work with any kind learning code receiver in our store.
 
Channel: 1CH
Remote Control Distance:0-100m
Encode: EV1527
Frequency:315 or 433 MHz
Current:20-25ma
Power Supply: 1 X 12V 27A Battery 
 
2.Receiver
 
1)Toggle/Self-Lock:   Press->On; Press again->Off
Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
2)Latched/Inter-Lock:   Press->On; Press other button->Off
Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
3)Momentary/Jog:   Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
 
(Original Setting is Toggle , Change it by yourself.)
 
Power Supply (Operating Voltage): AC 220V
Relay: 20A/14VDC 20A 125VAC
Work Voltage Range of Relay: AC 220V-240V
Sensitivity:-105 dBm
Operating Temperature:-40‘C ~ 80’C
Size:32 mm x 30 mm x 20 mm
Frequency:315 / 433 MHz
 
3.Package Included
 
0/1 x Receiver (with cover)
1/2/3 x Transmitter 
 
4.Learn code and Remove Code
 
Learning Code:
Press the learning button 3 seconds, the indicator light off .then press any button of the transmitter. The indicator flashes 3 times and the indicator light on,it means learning is successful.
 
Remove Code:
press the learning button about 5-8 seconds , the indicator turns on to off to on , it means the codes have been removed successfully .

13014299101102104

140